Polycap Studio presents Gundam Canada

Search This Blog

2014.06.27 RX78-2 Gundam ver. OYW Dragon (Remake)

on June 27, 2014

Get link
Facebook
Twitter
Pinterest
Email
Other Apps

OOB/Painted Category 1st Place Vanpla 1st Annual Mecha Model Competition @ Northwest Fan Fest 2014

Feature MG

Get link
Facebook
Twitter
Pinterest
Email
Other Apps

How To: Repair/Avoid a BLUSHING When Applying Flat Top Coat

If you have sprayed flat top coat on a cold or rainy day, you probably have seen a layer of frost appearing, as shown in these heart breaking pictures: This is called BLUSHING : A milky appearance of a topcoat caused by high humidity where water condenses on or in the wet coating. This can be eliminated by use of heat or a slower solvent or retarder. (http://www.sharpe1.com/sharpe/sharpe.nsf/Page/Paint+Terminology) It appears that temperature (<13°C) and humidity (>90%) are the two major contributing factors. I have done several things in the past and try to solve this issue. Addressing Temperature Factor: Keep It Warm Addressing Humidity Factor Method 1: Using Semi-Gloss / Gloss Top Coat Spray a thin layer of semi-gloss or gloss should do the trick. Note this is just a quick fix. In my experience, applying another coat of flat afterwards will unfortunately bring back all blushing. So, flat no more . Addressing Humidity Factor Method 2: Using

2023.08.27 RX78F00 GUNDAM (BUST MODEL)

2023.04.01 FA78-1 FULL ARMOR GUNDAM [BLUE COLOR VER.]

Powered by Blogger